In addition to gaseous ozone as a service, we offer three wonderful aqueous ozone systems.  Aqueous ozone is not a cleaning product, but it should be part of the cleaning and sanitizing process.  Ozone is the second most powerful sanitizer in the world, 3000 times more powerful than chlorine bleach and 50% stronger.  Yet, there is no chemical residue.  

Ozone uses an extra atom of oxygen to burn holes in the outer membrane of bacteria and virus.  Like being shot multiple times, the pathogens die in seconds after exposure.  Mixing ozone into water is simple, and it doesn’t take much.  There is therefore, very little offgassing or smell.

AquaTek 250 is just $159

AquaTek 250  is a perfect product of versatility and reliability. The applications for this unit will help reduce bacterial growth, and help keep your water clean and pure.  The AquaTek 250 offers “Cold Fusion” output that does not lose power with prolonged use.  Double up if you want more ozone output.  You can use ambient air on this system, or feed it with an oxygen source for medical grade ozone.  This is a “Bubbler System” that can be used in many ways:

• Kitchen for treating water, sanitizing food, and cleaning purposes
• Excellent for fighting colds, gingivitis, mouth sores, and as a mouht rinse.
• Use in spray bottle on stream to clean and sanitize kitchen surfaces.
• Run continuously in animal drinking water for constant sanitizing effect
• Can be used in tandem with tank-type carpet cleaning to offer chemical free carpet cleaning
• Even use this to make ozonated oil (olive, coconut, johoba), but use a tall slender glass for a long period.

PARTS INCLUDED

(1) 3 ft. of 3/16” x 5/16” Tubing,   (1) 3/16” x 3/16” Check Valve, (1) Large Cylinder Diffusor Stone, and (1) Air pump

This system is Top-of-the-Line with stainless steel housing, cold fusion ozone production that will not wear out, and can be adapted for many uses.  As a “Bubbler System” you can make ozone water, ozonated oil, treat vegetables and fruits, and even bubble the water for farm animals.  

SPECIFICATIONS

• Power: 120V or 240V AC
• Output voltage: 4.5KV
• Operating Temp: 32˚ – 110˚ F
• Ozone concentration: 250mg/hr. @ 7 SCFH
• Ozone generation: Cold Corona
• Dimensions (L) 5” (W) 4” (H) 2.75”
• Weight: 2 lbs.
• When using pressure application, do not exceed 10 PSI.

“Cold Fusion” uses glass tubes that do not wear out, but do not produce large volumes of ozone,  Cold fusion is perfect of aqueous ozone applications needing an unlimited supply of ozone.  The key issue for comparison to what is normally on the Internet is durability and power.  The output of the AquaTek 250 is very substantial, and even more powerful with an oxygen supply.  Be mindful that you may need to vent the air if this system is used in confined areas.  Elevated ozone level can cause respiratory irritation and coughing.